ไทย
Eng
Specifications
| Silicone wired | 15 Ohm, 38 Ohm, 55 Ohm, 86 Ohm, 100 Ohm, 180 Ohm, 400 Ohm, 424 Ohm, 1000 Ohm, 1750 Ohm |
| Fiberglass | 38 Ohm, 380 Ohm, 55 Ohm, 86 Ohm, 140 Ohm, 220 Ohm, 380 Ohm, 1000 Ohm, 3000 Ohm |
| Contant Power Cable | – Coaxial Cables (FTSH) White Silicon: 30 W/M, 40 W/M – Coaxial Cables (FTSH/I) Stainless Steel Coat: 30 W/M, 40 W/M |
| Self-Limit Tape Coaxial Cables (FST) |
30 W/M, 40 W/M This type of heater can maintain the temperature at 60-80 °C without the control of any thermostats. |
Made to Order
Please refer to types of heater and WATT.
| Sizeas | per user’s requirements |
| Lengthas | per user’s requirement |
| Voltage (Volt) | 110V, 220V, 380V |
| Watts (Watt) | based on size and usage of heaters |
Characteristics
It is applicable to many usages as follows:
| To Defrost | Some types of gases and liquids can cause freeze on the outer part of pipeline, and can block the flow of liquids inside pipe. This problem can be solved by the use of Cable Heater, winding around the outer pipe to defrost. This Cable Heater can be installed on the wall of refrigerator to help defrosting. |
| To DefrostTo Maintain Temperature | When liquids are heated and sent to pipeline, the temperature is dropping. In order to maintain heat level, this Cable Heater can be used to wind around pipe to increase the temperature. |
| To Solve the Problem of Condensation | This Cable Heater can be installed as an option to prevent condensation as room temperature and outside air temperature are different, thus causing the condensation. |